Making Double Clicks Easier

You may find that double clicking on icons using an ELI with your Raspberry Pi is not as easy as you would like. This short guide should help alleviate some of these issues if you are using Raspbian (Buster or later):

1. Open up the file manager on your Raspberry Pi.
2. Navigate to "/home/pi/.config/lxsession/LXDE-pi".
3. Open "desktop.conf" in a text editor.
4. Change "iNet/DoubleClickTime" to equal 500.
5. Add the line "iNet/DoubleClickDistance=50" directly below the "iNet/DoubleClickTime" line.

NOTE: These changes allow two clicks to be considered a double click if they are up to 500ms and 50 pixels apart from each other. The default Raspbian setting is 200ms and 20 pixels apart.