Making Double Clicks Easier

[Logan Moon]

You may find that double clicking on icons using an ELI with your Raspberry Pi is not as easy as you would like. This short guide should help alleviate some of these issues if you are using Raspbian (Buster or later):
[ol]
[li]Open up the file manager on your Raspberry Pi.[/li]
[li]Navigate to \”/home/pi/.config/lxsession/LXDE-pi\”.[/li]
[li]Open \”desktop.conf\” in a text editor.[/li]
[li]Change \”iNet/DoubleClickTime\” to equal 500.[/li]
[li]Add the line \”iNet/DoubleClickDistance=50\” directly below the \”iNet/DoubleClickTime\” line.[/li]
[/ol]
[attachment=4]FixDoubleClick_Raspberry_pi.png[/attachment]

NOTE: These changes allow two clicks to be considered a double click if they are up to 500ms and 50 pixels apart from each other. The default Raspbian setting is 200ms and 20 pixels apart.’),
(141, ‘Hi All,

I have purchased UEZ GUI 1788-70 WVM development kit. To test programming and flashing the software, I flashed uez gui demo app on board. uez GUI demo screen appears on LCD with icons. But I am not select any icons. for example I am not able to select slideshow/Apps icon.

Now I would like to go back to Out of box demo software application. But I am not able to find Out of box demo image anywhere in SD card. Could you please tell me where can I find out of box image file and steps to flash ?

Thanks in advance,
Sandeep

[Author]

Posts