Click to Enlarge

• Supports NXP P89LPC9xx family of microcontrollers
• USB port power so no external power supply required
• Supports USB 1.1 to 2.0
• Plugs directly into any standard USB Port - great for laptops
• Works with NXP free Flash Magic software that can be downloaded from the web
• USB-ICP supports Target Device Voltage range of 3.0 - 3.3V

The USB-ICP-LPC9xx is available for the price of $69.00 (USD).

---

USB-ICP supports the new In-Circuit Programming or ICP mode on NXP microcontroller families such as the LPC9xx. In-Circuit Programming uses a two-wire serial interface to program and erase ICP enabled microcontroller devices without removing them from the system. The ICP function uses only five pins: VCC, GND, PCL, PDA, and RSTn. A small connector is all that is needed to interface your application to the USB-ICP programmer.

• Quick Start Guide for the USB-ICP
  
  
• Supported device list as of 03/25/10
• Cable Pinouts and Target Connector Information for LPC9xx
• Download the USB-ICP-LPC9xx Brochure in PDF format (111KB)
• FAQ for USB-ICP

Download for Flash Magic:

• Download Flash Magic, the Windows User Interface Software for USB-ICP
• Download Release Notes for Flash Magic

USB-ICP requires USB Drivers:

For Windows XP users, USB-ICP drivers should be included. If your Windows XP Installation does not recognize USB-ICP, download the drivers from the following link:

• Click here for Windows XP drivers (only needed if not recognized)

• Click here for Windows 2000 drivers
• Click here for Windows 2000 Installation Instructions